Power Tool Accessories |
||
|
-
Make a Selection or Scroll Down - |
||
|
Bandsaw
Blades Bandsaw CoolantDrill Bits for Glass Grinder Coolant Grinder Face Shield |
Grinder Heads: Fine, Std, Speed Heads Specialty Grinder Heads Grinder Splash Guard Grinder Tops & Surfaces: Upper Work Surface Replacement Top Surface |
Power Tool
Foot Switch Ring Saw Blades Safety Glasses Taurus Accessory Kit Taurus Ring Saw Parts |
 |
Power Tool
Foot Switch Keep your hands free for work by using
a convenient foot switch. The grounded foot switch is designed
for use with any power up to 5 AMP. Most grinders, glass
saws and came saws draw only 1 to 2 AMPS. TL-318 Power Tool Foot Switch ............................ 24.95 |
|
|
Safety Glasses Heavy-duty plastic glasses have clear
lenses with side shields for added safety. Glasses are
light weight and can be worn over prescription glasses. |
|
|
Grinder &
Bandsaw Coolant Coolant added to water reservoir adds
life to your diamond grinding heads and your diamond bandsaw
blades. Also reduces heat that causes fractures while grinding
or cutting. Coolant mixes with water to product two gallons
from 8 oz jar. SP-904 Grinder & Bandsaw Coolant ....................... 3.79 |
|
|
Grinder Face
Shield Transparent 11" x 8-1/2"
plastic shield is larger than most face shields. Attaches
easily to Inland and most other grinders. TL-315 Grinder Face Shield ....................... 12.95 |
|
|
Grinder Splash
Guard Shield fits around grinder to protect
work area from spray. Heavy plastic covered board is hinged
to allow easy placement and cleans up easily. Designed
to fit any grinder. TL-319 Grinder Splash Guard ....................... 11.95 |
|
|
Diamond Grinder
Heads Inland diamond grinder heads fit all
Inland grinders and can be used as replacements on Glastar (except
Starlet/G5), Gemstone or other grinders with a 5/16" shaft
size. Available in Standard grit, Fine grit or Speed (heavy
grit). The standard grit grinder head is used most often.
The Fine Grit heads provide a much smoother edge, but grind much
slower. The Speed Bit heads grind nearly twice as fast
as standard heads but leave a somewhat rougher edge. Other
specialty heads are also available below.
Note:
Specialty Heads Available Below |
|
|
Specialty
Grinder Heads The Lamp Bit grinder head has 9 degree
and 18 degree angled sides, which allows you to grind the edge
of lamp panels to fit properly. The Ripple Bit grinder
head is used to reduce the thickness of the edge of specialty
glass to the standard 1/8" thickness. A replacement
5" disc is also available for the Inland Twin Spin grinder.
Inland diamond grinder heads fit all Inland grinders and can
be used as replacements on Glastar (except Starlet/G5), Gemstone
or other grinders with a 5/16" shaft size. Regular
grinder heads are also available, above.
|
|
Upper Work
Surface "Second Story" work surface
for Inland grinders allows better control when working with 1/4"
bit. Raises grinder surface to level of bit. TL-316 Inland Upper Work Surface ....................... 13.95 |
|
|
Inland Replacement
Work Surface Replacement top work surface for Inland
WizCG, Aero or Impulse grinders. A 3/4" 'Bit Sert'
is also included with the work surface. TL-381 Inland Replacement Work Surface ....................... 13.95 |
|
Return to top of
page |
|
|
|
Taurus II Accessory Kit  Accessory Kit for the Taurus II ring
saw adds increased versatility to the powerful saw. Kit
includes face shield, spot light, straight-edge guide, 10 degree
and 45 degree miter guides (for lamp edges and box corners),
30-60-90 degree cut-off triangle guides, and circle guide (up
to 15-3/4" diameter circles). The light and face shieid
are also available separately. TL-429 Taurus II Accessory Kit ....................................... 49.95 TL-434 Taurus II Light/Face Shield Set ............................ 29.95 |
|
On-Line Special! |
Seamless Stainless
Steel Inland seamless stainless steel
diamond bandsaw blade is designed to fit the Inland DB-100, Glass
Ace or Tiger bandsaws. The 37.7" blade also fits all
Gryphon saws, plus Diamond Laser DL-1000, DL-1000s, and DL-3000
saws. (Inland #90007) TL-372 Stainless Steel Diamond Bandsaw Blade .................. Only 64.95 Wood cutting, seamless stainless steel blade for above saws can be used to cut wood, acrylic and plastic. (Inland #90001) TL-372 Stainless Steel Wood Bandsaw Blade ............................. 24.95 |
|
Return to top of
page |
|
|
NEW! |
Taurus II
Ringsaw Blades Taurus II ring saw blades are 5-3/4" in diameter seamless diamond coated blades. The standard blade is .039"/80 grit. An optional "jeweler's" fine-grit blade which is .035"/100 grit (seamless) is also available. Also available is the "Super" blade which is .050"/80 grit (seamless). The blade is 25% thicker and is perfect for mosaic tile and other more abrasive situations. The separating 'snap-apart' blade allows
you to insert the blade into a drilled hole. This lets
you cut a piece out of the middle of glass without having an
'entry-cut' from the edge of the glass. Each ring saw blade
includes replacement grommets (3 yellow & 4 red). TL-421 Standard Ringsaw Blade ..................... each 64.75 / 3+ 59.95 TL-430 Fine-Grit Jeweler's Ring Blade ............. each 64.75 / 3+ 59.95 TL-435 Super Ring Blade .............................. each 64.75 / 3+ 59.95 TL-432 Separating, 'snap-apart' Ring Blade ..... each 64.75 / 3+ 59.95 |
|
Diamond Glass Drill Bits See Full Page of Diamond Drill Bits for Glass: |